ʻO ka ʻili silikoni kahi huahana ʻili synthetic e like me ka ʻili a hiki ke hoʻohana ʻia ma kahi o ka ʻili. Hana ʻia ia i ka lole ma ke ʻano he kumu a uhi ʻia me ka polymer silicone. ʻElua mau ʻano: silicone resin synthetic leather a me silicone rubber synthetic leather. ʻO ka ʻili silikoni ka maikaʻi o ka ʻala ʻole, ke kūpaʻa hydrolysis, ka pale ʻana i ka wā, ka mālama ʻana i ke kaiapuni, ka hoʻomaʻemaʻe maʻalahi, ke kūpaʻa kiʻekiʻe a me ka haʻahaʻa haʻahaʻa, ka waikawa, ka alkali a me ka paʻakai paʻakai, ka pale māmā, ka pale ʻana i ka wela, ka pale melemele, ke kūlou ʻana, disinfection, a ikaika kala kala. Hiki ke hoʻohana ʻia i loko o nā lako o waho, nā yachts a me nā moku, nā mea hoʻonani palupalu palupalu, loko o ke kaʻa, nā hale ākea, nā mea haʻuki, nā mea lapaʻau a me nā kahua ʻē aʻe.
1. Ua maheleia ka hale i ekolu papa:
ʻO ka papa hoʻopā polimer silicone
ʻO ka papa hana polimer silikoni
Lapa lepo
Hoʻokumu kūʻokoʻa kā mākou hui i kahi laina hana ʻokiʻoki ʻelua-pani a me ka kuke ʻana, a hoʻohana i kahi ʻōnaehana hānai automated, maikaʻi a maʻalahi. Hiki iā ia ke hana i nā huahana ʻili synthetic silicone o nā ʻano like ʻole a me nā hoʻohana. ʻAʻole hoʻohana ke kaʻina hana i nā mea hoʻoheheʻe organik, ʻaʻohe wai ʻino a me ka hoʻokuʻu ʻana i ke kinoea, ʻike i ka ʻōmaʻomaʻo a me ka hana akamai. Ke manaʻoʻiʻo nei ke Kōmike Achievement Achievement ʻepekema a me ʻenehana i hoʻonohonoho ʻia e ka China Light Industry Federation i ka "High-performance Special Silicone Rubber Synthetic Leather Green Manufacturing Technology" i hoʻomohala ʻia e kā mākou hui i hiki i ka pae alakaʻi honua.
2. Hana
Ka pale ʻana i ka pila AATCC 130-2015——Papa 4.5
ʻO ka wikiwiki o ka waihoʻoluʻu (maloʻo / pulu pulu) AATCC 8——Papa 5
ʻO ke kūpaʻa hydrolysis ASTM D3690-02 SECT.6.11——6 mahina
ISO 1419 Keʻano C——6 mahina
Aakika, alkali a me ka paʻakai AATCC 130-2015——Papa 4.5
Māmā māmā AATCC 16——1200h, Papa 4.5
Huihui mea ola kino TVOC ISO 12219-4:2013——TVOC haʻahaʻa haʻahaʻa.
ʻO ke kū ʻana o ka wā kahiko ISO 1419——Papa 5
Ke pale ʻana i ka pehu AATCC 15——Papa 5
Palena UV ASTM D4329-05——1000+h
Hoʻopaʻa ahi BS 5852 PT 0---Crib 5
ASTM E84 (Hoʻopili ʻia)
NFPA 260 --- Papa 1
CA TB 117-2013---Paa
Kū'ē abrasion Taber CS-10---1,000 Rubs pālua
ʻO Martindale Abrasion---20,000 pōʻai
Hoʻoulu nui ʻia ISO 10993-10:2010---Papa 0
Cytotoxicity ISO 10993-5-2009 --- Papa 1
Manaʻo ISO 10993-10:2010---Papa 0
Hiki ke hoʻololi i ka ASTM D2097-91(23 ℃)---200,000
ISO 17694(-30 ℃)---200,000
Pale melemele HG/T 3689-2014 He ala,6h---Papa 4-5
ʻO ke kū anuanu CFFA-6A---5 # kaʻa
ʻO ke kūpaʻa ʻana o ka mold QB/T 4341-2012---Papa 0
ASTM D 4576-2008 --- Papa 0
3. Nā wahi noi
Hoʻohana nui ʻia i loko o nā ʻāpana palupalu, nā waiwai haʻuki, nā noho kaʻa a me nā kaʻa i loko o ke kaʻa, nā noho palekana keiki, nā kāmaʻa, nā ʻeke a me nā mea hoʻonaninani, ka lāʻau lapaʻau, ka hoʻomaʻemaʻe, nā moku a me nā moku moku a me nā wahi kaʻa lehulehu, nā lako waho, etc.
4. Hoʻokaʻawale
Hiki ke hoʻokaʻawale ʻia ka ʻili silicone i ka ʻili synthetic rubber silicone a me ka ʻili synthetic resin silicone e like me nā mea maka.
| Hoʻohālikelike i nā papahana | Lapa silikoni | Silika resine |
| Mea maka | ʻAila silika, kalapona keʻokeʻo ʻeleʻele | Organosiloxane |
| Kaʻina hana synthesis | ʻO ke kaʻina hana synthesis o ka ʻaila silicone he polymerization nui, ʻaʻole ia e hoʻohana i nā solvents organik a i ʻole ka wai ma ke ʻano he kumu hana. He pōkole ka manawa synthesis, maʻalahi ke kaʻina hana, a hiki ke hoʻohana ʻia ka hana hoʻomau. Paʻa ka maikaʻi o ka huahana | Hoʻopili ʻia ʻo Siloxane a hoʻopaʻa ʻia i loko o kahi huahana pūnaewele ma lalo o nā kūlana catalytic o ka wai, ka mea hoʻoheheʻe organik, ka waikawa a i ʻole ka base. He lōʻihi a paʻakikī ke kaʻina hana hydrolysis. ʻOkoʻa loa ka maikaʻi o nā pūʻulu like ʻole. Ma hope o ka pau ʻana o ka hopena, pono ke kalapona hoʻōla a me ka nui o ka wai no ka hoʻomaʻemaʻe. He lōʻihi ka pōʻaiapili huahana, haʻahaʻa ka hua, a pau nā kumu wai. Eia kekahi, ʻaʻole hiki ke hoʻopau loa ʻia ka mea hoʻoheheʻe organik i ka huahana i hoʻopau ʻia. |
| Kino | ʻO ka mālie, ʻo 0-80A ka laulā paʻakikī a hiki ke hoʻoponopono ʻia ma ka makemake | Ua kaumaha ka plastic, a ʻoi aku ka paʻakikī ma mua o 70A. |
| Hoʻopā | E like me ka ʻili pēpē | He 'ano 'o'ole'a a kani ke kani 'ana i ka wā e he'e ana. |
| ʻO ke kūpaʻa hydrolysis | ʻAʻohe hydrolysis, no ka mea, he mea hydrophobic nā mea hoʻoheheʻe silicone a ʻaʻole hana i kekahi hopena kemika me ka wai | ʻO ke kūpaʻa hydrolysis he 14 mau lā. No ka mea, ʻo ka silicone resin he huahana hydrolysis condensation o organik siloxane, maʻalahi ke hoʻololi ʻana i ka hopena scission kaulahao i ka wā e hālāwai ai me ka wai waikawa a me ka wai alkaline. ʻOi aku ka ikaika o ka acidity a me ka alkalinity, ʻoi aku ka wikiwiki o ka hydrolysis rate. |
| Nā waiwai mīkini | Hiki i ka ikaika tensile ke hiki i 10MPa, hiki i ka ikaika o ka waimaka ke hiki i 40kN / m | ʻO ka ikaika tensile kiʻekiʻe he 60MPa, ʻo ka ikaika haʻalulu kiʻekiʻe he 20kN / m |
| Ka hanu | ʻO nā āpau ma waena o nā kaulahao molecular he nui, breathable, oxygen permeable, a permeable ， Ke kūpaʻa kiʻekiʻe o ka wai. | ʻAha liʻiliʻi liʻiliʻi intermolecular, kiʻekiʻe crosslinking density, maikaʻi ʻole ka ea permeability, oxygen permeability, a me ka moisture permeability |
| Kūleʻa wela | Hiki ke kū i ka -60 ℃-250 ℃, a ʻaʻole e loli ka ʻili | Pumi wela a maloʻo ke anu |
| Nā waiwai vulcanization | ʻO ka hana kiʻiʻoniʻoni maikaʻi, ka wikiwiki hoʻōla wikiwiki, ka hoʻohana haʻahaʻa haʻahaʻa, ka hana maʻalahi, ka hoʻopili ikaika ʻana i ke kumu | ʻO ka hana kiʻiʻoniʻoni maikaʻi ʻole, me ke kiʻekiʻe o ka mālama ʻana i ka mahana a me ka manawa lōʻihi, kūpono ʻole ke kūkulu ʻia ʻana o nā wahi nui, a me ka hoʻopili maikaʻi ʻana o ka uhi i ka substrate. |
| Maʻiʻo halogen | ʻAʻohe mea halogen ma ke kumu o ka mea | Loaʻa ʻia ʻo Siloxane e ka alcoholysis o ka chlorosilane, a ʻoi aku ka nui o ka chlorine i loko o nā huahana silicone resin ma mua o 300PPM. |
| 'ikamu | Wehewehe | Nā hiʻohiʻona |
| ʻili maoli | ʻO ka ʻili pipi, i hoʻokaʻawale ʻia i ka ʻili bipi melemele a me ka peʻe buffalo, a ʻo nā ʻāpana o ka uhi ʻana he resin acrylic a me polyurethane. | Hiki ke hanu, ʻoluʻolu i ka hoʻopā ʻana, paʻakikī ikaika, ʻala ikaika, maʻalahi e hoʻololi i ke kala, paʻakikī e mālama, maʻalahi e hydrolyze |
| ʻili PVC | ʻO ka papa kumu he mau lole like ʻole, ka nui o ka nylon a me ka polyester, a ʻo nā ʻāpana o ka uhi ʻana he polyvinyl chloride ka nui. | He maʻalahi ke hana, pale ʻole, kūʻai aku; ʻO ka maikaʻi ʻole o ka ea, maʻalahi ka makahiki, paʻakikī i ka haʻahaʻa haʻahaʻa a hana i nā māwae, ʻo ka hoʻohana ʻana i nā plasticizers ma Dali e hōʻeha i ke kino o ke kanaka a hoʻoulu i ka pollution koʻikoʻi a me ka ʻala ikaika. |
| ʻili PU | ʻO ka papa kumu he mau lole like ʻole, ka nui o ka nylon a me ka polyester, a ʻo nā ʻāpana o ka uhi ʻana he polyurethane ka nui. | ʻoluʻolu i ka hoʻopā ʻana, ākea o nā noi; ʻAʻole hiki ke hoʻopaʻa ʻia, kokoke i ka ea, maʻalahi e hydrolyzed, maʻalahi e delaminate, maʻalahi e haki i nā wela kiʻekiʻe a haʻahaʻa, a hoʻohaumia ke kaʻina hana i ke kaiapuni. |
| ʻili microfiber | ʻO ke kumu he microfiber, a ʻo nā ʻāpana uhi uhi ka nui o ka polyurethane a me ka resin acrylic. | ʻO ka manaʻo maikaʻi, ka waikawa a me ke kūpaʻa alkali, ka hoʻohua maikaʻi ʻana, ka wikiwiki pelupelu maikaʻi; ʻAʻole hiki ke ʻaʻahu a maʻalahi ke haki |
| ʻili silikoni | Hiki ke hoʻopilikino ʻia ke kumu e like me nā pono o ka mea kūʻai aku, a ʻo ka ʻāpana uhi uhi ʻia he 100% silicone polymer. | ʻO ka palekana o ke kaiapuni, ke kūʻana o ka wā, kaʻakika a me ka alkali, ke kūpaʻa hydrolysis, maʻalahi ke hoʻomaʻemaʻe, ke kiʻekiʻe a me ka haʻahaʻa o ka mahana,ʻaʻohe meaʻala; ʻO ke kumu kūʻai kiʻekiʻe, ka pale ʻana i ka ʻili a maʻalahi ke mālama |
Ka manawa hoʻouna: Sep-12-2024